OPTIONAL ACCESSORIES

Patented Electric Toe Guards: Where personnel protection is desired beyond that required by federal regulations, specify Advance Electric Toe Guards. These stop the downward travel of a platform when an object makes contact with the electric toe guard. Simply pushing the "UP" button on the control station raises the platform so the object can be removed and the system reset. Electric Toe Guards can be installed on any or all of the platform sides. Its hinged actuator projects down and away from the rigid platform toe guard, rather than hanging directly beneath it. Electric Toe Guards can act as an emergency down travel stop switch for anyone within arm's reach of the platform, providing added electronic protection without sacrificing the minimum 8 inch bevel toe guard mechanical protection required by federal regulations. Electric Toe Guards
Automatic Mechanical Wheel Chock:
This 16" x 48" chock prevents loads from rolling off the lift except when the lift is completely lowered at ground level.
Whel Chock
Night Locks:
Night locks are located on the four platform corners. They swivel 360 degrees so they can be positioned over the edge of a concrete dock to mechanically lock the lift in a raised position for security purposes. They are not load supporting devices and are ordered in lieu of hand rails, which are not required in a raised concrete loading dock application.
Night Locks
Night Locks
Limit Switch:
The adjustable limit switch restricts the platform's upward travel. To avoid having electric lines in the pit, it should only be used in applications where the platform must stop at the same elevation every time.
Limit Switch