Powered Turn Tables' Technical Information and Accessories

TECHNICAL

1. All powered turn tables are non-reversing with push button control and 115/60/3 voltage.
2. Height can be reduced to approximately manual turn table height if the drive unit can project above or below the turn table profile.

OPTIONAL ACCESSORIES

MEDIUM DUTY (TP-200):

1. Models mounted on top of lift tables do not require a freestanding base so height becomes 12" Deduct
2. Circular turn table add-on
3. Limit switch mounted
4. 7.5 rpm speed N/C
5. Variable speed DC motor (.25 to 7.5 rpm) 115 volt only

HEAVY DUTY:

1. Bevel toe guards (minimum lowered height goes to approx. 12" on TP models 605, 606, 607 and 608) ft.
2. Rectangular platforms (width can be no less than 1/2 the length and eccentric loading is restricted to 3/4 of the load on 3/4 of the platform. Select model of square platform in which rectangle will fit) N/C
3. Circular platforms (select model of square platform in which circle will fit)
4. Standard speed is 3.6 rpm. For speeds of 1.8 or 2.4 rpm
   
   

ALL:

1. Reversing capability